Brighouse
0800 107 5345 Book a survey

Brighouse··Monitor

Fire alarm monitoring.

Your fire alarm's signals answered 24 hours a day by an alarm receiving centre we work with, which contacts your call list. It matters more now that West Yorkshire's fire service no longer attends every alarm automatically.

Signalling module with an antenna inside an opened alarm panel
A signalling module inside an alarm panel.
  • Answered24hBy an alarm receiving centre we work with, 24 hours a day
  • WYFRS policyMar 2024No automatic attendance at non-sleeping commercial premisesSince 18 March 2024
  • Switch-offJan 2027Analogue phone lines due to be switched offBy 31 January 2027
  • Standard5839-1Maximum times for a monitored system to pass its alarm signal onBS 5839-1:2025

What a monitored fire alarm does

A monitored fire alarm sends its signal over a communication path to an alarm receiving centre we work with, which answers it 24 hours a day. The centre checks the signal and contacts the people on your call list, so someone hears about the alarm even when the building is empty.

We arrange fire alarm monitoring for homes and businesses across West Yorkshire, North Yorkshire and nationwide. Our monitoring overview covers how signals travel and the three kinds of monitoring we arrange.

  1. 01

    Your fire alarm

    Sends its signal when it activates.

  2. 02

    A communication path

    Carries the signal on. How the panel connects matters.

  3. 03

    An alarm receiving centre we work with

    Answers it 24 hours a day and checks the signal.

  4. 04

    Your call list

    The people the centre contacts, in order.

  5. 05

    The 999 call

    Someone checks and reports fire or signs of fire.

West Yorkshire: At non-sleeping commercial premises, the fire service comes on the 999 call, not on the alarm signal alone.

West Yorkshire policy

Why the fire service may not come

Since 18 March 2024, West Yorkshire Fire and Rescue Service has not attended fire alarm signals automatically at non-sleeping commercial premises, such as shops, leisure venues and factories. It needs a 999 call reporting fire or signs of fire. Sleeping premises, schools and colleges, heritage buildings and high-risk chemical sites still get an automatic response. WYFRS: automatic fire alarms.

A hand turning the key in a C-TEC fire alarm control panel, with its fire and zone lights

For a shop or factory that closes at night, that changes what monitoring is for.

Without monitoring

An alarm sounding in an empty unit will not bring a fire engine on its own.

With monitoring

With monitoring, someone on your call list hears about it, can check and can make the 999 call.

Decide who does what before the alarm sounds

The receiving centre works from the contacts you give it. Agree the list when the system is connected, and keep it up to date as people change.

Your list can include keyholders, a site manager or on-site security, in the order you want them called.

A typical fire alarm call list

  1. Who is called In order, with numbers that are answered out of hours.
  2. Who checks Someone who can reach the building, or check it safely.
  3. Who calls 999 The person who confirms fire or signs of fire.
  4. Who records it Every activation goes in the fire logbook.
The four questions a call list should answer. Fill in your own names and numbers.

Where monitoring is expected

Under BS 5839-1:2025, leaving out remote monitoring is no longer an acceptable variation in residential care and supported housing. The 2025 edition also sets maximum times for a monitored system to pass its alarm signal on, so the signalling path matters too.

Residential care and supported housing
Remote monitoring is expected under the 2025 edition
Elsewhere

Elsewhere, monitoring is usually a choice made from your fire risk assessment, your insurer’s conditions and how often the building is empty.

Accredited for fire

The fire alarm behind the signal

Monitoring is only as good as the system sending the signal.

We design, install, commission and maintain fire alarms under our BAFE SP203-1 registration, certificated by SSAIB. Check both on the registers below.

Keeping false alarms down

WYFRS charges for persistent false alarms. BS 5839-1:2025 expects each false alarm to be investigated and recorded in the logbook, and a standard false alarm notice displayed at control equipment that is linked to the fire and rescue service.

  • Investigate each oneAnd record it in the logbook
  • Display the noticeA standard false alarm notice at control equipment linked to the fire and rescue service

If your alarm keeps going off with no fire, report it on our fire alarm faults page. Regular six-monthly servicing can find causes before they trigger the alarm.

Phone line switch-off

31 January 2027Analogue phone lines due to be switched off

Does your fire alarm still signal over a phone line?

Analogue phone lines are due to be switched off by 31 January 2027, and a fire alarm that signals over one will stop signalling. We can check how yours signals today and tell you what it needs before the switch-off. Read what the switch-off means for monitoring.

Common questions

Something else? Call 0800 107 5345.

Will the fire brigade come if my monitored alarm goes off?

In West Yorkshire, not automatically at non-sleeping commercial premises. The receiving centre contacts your call list, and someone needs to call 999 to report fire or signs of fire. Sleeping premises, schools and colleges still get an automatic response.

Does the West Yorkshire policy apply in Harrogate?

No. Harrogate is covered by North Yorkshire Fire and Rescue Service, which sets its own policy. Check theirs rather than relying on the West Yorkshire rules.

Can you monitor a fire alarm someone else fitted?

Tell us the make of panel and how it signals today, and we will tell you whether we can take it on.