Brighouse
0800 107 5345 Book a survey

Brighouse··Repair

Report a fault or book a repair.

Ring 0800 107 5345 or use the form below. Tell us the system, the address and what you can see, and follow the safe first steps on this page while you wait.

The quickest way to report it

Ring 0800 107 5345 and tell us what is happening, or use the form at the foot of this page.

We don’t publish attendance times. When you report a fault, we will talk you through what happens next.

Call 0800 107 5345 Go to the fault form

What to tell us

  • The system Fire alarm, intruder alarm, CCTV, gate, door entry or emergency lighting.
  • The address And the best person to meet us on site.
  • What you can see The message on the panel or keypad, a flashing light, or what stopped working.
  • The make If you know it, and whether the system is monitored.

Safe first steps, system by system

Fire alarms

Fire alarm fault, or sounding with no fire

If there is any sign of fire, evacuate and call 999.

Once you are sure there is no fire, silence the alarm using the panel’s user instructions, and leave the system powered on. Note what the panel shows, such as the zone or device, and write the false alarm or fault in the logbook: BS 5839-1:2025 expects every false alarm to be investigated and recorded.

Repeated false alarms can cost money: West Yorkshire Fire and Rescue Service charges for persistent ones. See how false alarms affect a monitored fire alarm. More on fire alarm design and installation.

Report a fire alarm fault.

Intruder alarms

Intruder alarm going off

Check from outside, without putting yourself at risk, whether there are signs of a break-in. If there are, do not go in: call 999.

If there are none, reset the alarm with your code and note any message on the keypad. If the alarm is monitored, the alarm receiving centre we work with may already be contacting the people on your call list, so let them know you are there.

An alarm that keeps going off for no reason needs a proper look, so report it even once it has reset. See intruder and burglar alarms.

Report an alarm fault.

CCTV

Cameras offline or not recording

Check the recorder has power and its lights are on.

If you have lost the picture on your phone but the recorder is running, check your internet connection and router, because remote viewing depends on them. Note which cameras are affected and roughly when they stopped.

More on CCTV for homes and businesses.

Report a CCTV fault.

Automated gates

Gate stuck, or behaving oddly

Take the gate out of use until it has been checked, and keep people, especially children, away from its moving parts.

Do not try to force it. Only use the manual release if you know how and the manufacturer’s instructions allow it. A gate that moves erratically, or does not stop or reverse when something is in its way, is a safety problem.

After the repair, read about gate safety inspections and force testing.

Report a gate fault.

Access control and door entry

Door, reader or fob not working

If a door on an escape route will not release, tell everyone in the building to use another exit and ring us straight away.

If one fob or card fails, try another on the same reader: if that works, the fault is probably the fob, not the door. Note which doors and readers are affected.

More on access control and door entry.

Report a door entry fault.

Emergency lighting

Emergency light showing a fault

Note where the fitting is and what its indicator shows, and record it in the emergency lighting logbook.

If several fittings on one escape route are out, check with your fire risk assessor whether you need extra measures until they are fixed.

More on emergency lighting.

Report an emergency lighting fault.

A system we didn’t fit?

We repair any make of intruder alarm, wired or wireless, and we repair automated gates we did not install.

For a fire alarm, CCTV or door entry system, tell us the make and what it is doing, and we will tell you whether we can help.

Stop the same fault coming back

A service is where small problems get caught: a tired battery, a dirty detector, a gate whose forces have drifted. Regular visits can find them before they stop the system working. See planned servicing for every system.

Faults and repairs

Report a fault or book a repair.

Tell us what you need and when suits you, and we will call you back. For a fault, ringing is quickest: 0800 107 5345.

What do you need?
Best time to call (optional)
We only use your details to reply to this enquiry. Privacy policy.

4.3 from 17 Google reviewsSince 2012Brighouse & Harrogate